[. . . ] 1 2 3 4 5 6 7 8 9 Indicator light: The red indicator light is lit whenever a key is pressed. [. . . ] EXAMPLE: To enter code 0027, do not press the keys PROG+ and PROG-, press VOL+ twice and VOL- seven times. Should the code entered not be on the list, the red indicator lamp flashes rapidly during 3 seconds and then goes off. Code check: Direct the remote control towards the TV set and try to switch it over to standby by simply pressing the key G. Open the cover on the back of the remote control by pushing down on the tab and lifting the cover off. When exchanging the batteries, it may be necessary to reprogram the unit. Press the Mode key that corresponds to the type of product you want to control: TV: television set, SAT: satellite or cable receiver. Direct the remote control towards the TV set and try to switch it off by simply pressing the key G. Should the set not switch off, press G as many times as required (up to 200 times), until the set switches off. [. . . ] Conservez cette notice et la liste des codes séparée afin de pouvoir reprogrammer ultérieurement la télécommande pour commander d'autres appareils. [. . . ]